Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The Fiori20 adapter is not a platform adapter, but a UI adapter. The Fiori20 adapter automatically re-styles old (Fiori 1) applications to match Fiori2 design requirements. @version 1.73.1 @fileOverview The purpose Fiori20AdapterTest in this file is to decide whether to load the Fiori20Adapter at all. This file is kept small in size on purpose as it is always required in productive code even when Fiori 2 adaptation is not required. @version 1.73.1 Required init with {getGroups: functions} Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The <code>sap.ushell.System</code> object with related functions. @fileOverview Technical parameters do not normally appear in the URL as intent parameters of a target application, unless explicitly entered by the user. They also do not belong to the set of the application startup parameters. Instead, they are accessed by the application on demand via an API call. Of course these parameters can appear in the target URL if the URL has already been formed and entered in the address bar after clicking a link in an e-mail for example. In this case technical parameters do appear in the URL and this behavior should be kept stable. In principle, information should never be removed from a URL once the URL enters the address bar. In this way, the link can be copied or bookmarked for later access. Technical parameters should be used when their values originate from data forwarded to, or generated during, client-side target resolution. Such data could, for example, be included in inbounds. A technical parameter consists of a name and a value. Such a value of a technical parameter is determined at runtime during navigation and injected in the UI5 application component or the application container that hosts the target application in an iframe. UI5 applications can, in practice, access the raw value determined at runtime by <code>this.getComponentData().technicalParameters</code>. However, in this file, we define a view over the raw value which might transform the raw parameter value by executing additional logic. Therefore, applications are encouraged to use the <code>AppLifeCycle</code> service in the following way: <code> sap.ushell.Container.getService("AppLifeCycle").getCurrentApplication().getTechnicalParameter("sap-fiori-id"); </code> It is also possible to prevent applications from using the technical parameters. If the application tries to access an internal parameter (e.g., sap-ui-app-id-hint) via the API, the application receives an error message. @version 1.73.1 @private global jQuery, sap, clearTimeout, console, window Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The URL Template Processor. This module can be used to generate URLs, based on a template and a given context. A URL template shows the structure of the desired URL, reporting the name of the target parameters in the various parts of this structure. A URL template is expressed according to the proposed standard rfc6570, for example: <code>http://www.example.com{?queryParam}</code> The parameters that appear in the URL template are then resolved as specified by a mini-language that expresses how the parameter can be recovered. For example, the set below allows to recover <code>queryParam</code> from a specific path in the site: <pre> { queryParam: "{/path/to/my/section}" } </pre> The following URL results when the template of the example above is expanded with the above set of parameters: <code>http://www.example.com?queryParam=myValue</code> The language to define parameters in the URL Template parameter set contains a minimal set of conditionals, logical operators, and functions that allow to define the parameter set with a certain degree of control. @version 1.73.1 @private @namespace sap.ushell.Ui5NativeServiceFactory @private @namespace sap.ushell.Ui5ServiceFactory @private @fileOverview The <code>sap.ushell.User</code> object with related functions. @fileOverview Implementation of FLP User Activity Log. Records the User's last _maxLoggedMessages (currently set to 30) Actions and Errors, and last Navigation action details. Implementing API for adding a message (either ACTION or ERROR) and retrieving the logged data or the enhanced logged data. The data is kept on sessionStorage, hence it is session-based and is cleaned on browser refresh action Logged Errors and actions: Kept on the sessionStorage in sap.ushell.UserActivityLog.loggingQueue - Any call to jQuery.sap.log is logged using a LogListener - Any Error Message is logged using jQuery.sap.log.error call in the "error" function of Message Service - User Actions that invoke any of the events in _observedLaunchpadActions or _observedGeneralActions are logged using and additional listener (i.e. _handleAction) that is subscribed to those events - Failure in functions of LaunchPage that return Deffered.promise are logged using an additional fail handler that call jQuery.sap.log.error Last navigation action's details are kept on the sessionStorage in sap.ushell.UserActivityLog.lastNavigationActionData and collected using: - Decorator function (i.e. _tileOnTapDecorator) of sap.ushell.ui.tile.TileBase.prototype.ontap event of TileBase - Event handler subscribed to openApp event Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview Utility functions for sap/ushell/Config. @private @fileOverview Methods to understand in what order template parameters shall be resolved. Because values of URL Template Parameters can refer to the value of other parameters, a proper order for finding the value of parameters must be established (e.g., by resolving parameters without a depending parameters first). The proper order of evaluation can be determined by creating and visiting a graph that represents parameters and depending parameters as nodes. This graph can be also used to detect cyclic references in the parameter set definition. @version 1.73.1 @private @fileOverview contains methods to parse and execute functions defined for the URL Template parameter language. @version 1.73.1 @private @fileOverview URL Template Processor Resolvers For a given context (e.g., the reference to a site, the application section from the site, parameters added during runtime...), this module can be used to find the values associated to given URL Template parameter names. @version 1.73.1 @private @fileOverview the URL Template Parameter parser. This file contains utilities to parse an entire set of template parameter definitions. This parser allows to log what is understood by the machine during runtime (for debugging purposes), but also to dramatically reduce the complexity of the code and its future maintainability. In practice, can be used to turn sets of strings like definitions like: <pre> { p1: "{*|match(a)|match(b)}" } </pre> into something like: <pre> { "type": "expression", "value": { "type": "pipe", "value": [{ "type": "wildcard", "value": "*" }, { "type": "function", "args": [{ type: "literal", value: "a" }], "name": "match", "params": [] }, { "type": "function", "args": [{ type: "literal", value: "b" }], "name": "match", "params": [] } ] } } </pre> @version 1.73.1 @private @fileOverview pure utility functions for modules of <code>URLTemplateProcessor</code> @version 1.73.1 @private Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview ClientSideTargetResolutionAdapter for the CDM platform. The ClientSideTargetResolutionAdapter must perform the following two task: <ul> <li>provide the getInbounds method to return the list of Target Mappings used by ClientSideTargetResolution service;</li> <li>provide the resolveHashFragment function, a fallback method called by ClientSideTargetResolution service.</li> </ul> @version 1.73.1 @fileOverview The Unified Shell's sap.ushell.adapters.cdm.CommonDataModelAdapter for the 'CDM' platform. @version 1.73.1 @fileOverview The ConfigurationDefaults adapter for the CDM platform. @version 1.73.1 @namespace Default namespace for Unified Shell adapters for the Common Data Model (CDM) platform. @name sap.ushell.adapters.cdm @see sap.ushell.adapters.cdm.ContainerAdapter @since 1.48.0 @private @fileOverview The Unified Shell's LaunchPageAdapter for the 'CDM' platform - Version 2 (V2) @version 1.73.1 @fileOverview MenuAdapter for the CDM platform. @fileOverview The Unified Shell's platform independent sap.ushell.adapters.PagesCommonDataModelAdapter. @version 1.73.1 @fileOverview The Personalization adapter for the CDM platform. The CDM personalization adapter can be used to store data in the RA@ABAP platform. @version 1.73.1 @fileOverview Helper of modifying the home page data for the 'CDM' platform. @version 1.73.1 @private @fileOverview Helper of accessing catalog data for the 'CDM' platform. @version 1.73.1 @private @fileOverview Helper of accessing Home Page data for the 'CDM' platform. @version 1.73.1 @private @fileOverview Transforms relative URIs as used e.g. for data sources in the manifest.json @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The Base of Unified Shell's LaunchPageAdapter for the 'CDM' platform - Version 3 (V3) and StaticGroupsContainer for Featured Group @version 1.73.1 @fileOverview The Unified Shell's LaunchPageAdapter for the 'CDM' platform - Version 3 (V3) @version 1.73.1 @fileOverview The Unified Shell's LaunchPageAdapter for the 'CDM' platform - Version 3 (V3) @version 1.73.1 @fileOverview Helper of accessing catalog data for the 'CDM' platform. @version 1.73.1 @private @fileOverview Helper of accessing Home Page data for the 'CDM' platform. @version 1.73.1 @private @fileOverview Helper of accessing visualization data for the 'CDM' platform. TODO: Simplify function names @version 1.73.1 @private Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The Unified Shell's appState adapter for the local platform. TODO will be replaced by true persistence within this SP! This adapter delegates to the Personalization Adapter @version 1.73.1 @fileOverview The Unified Shell's ClientSideTargetResolutionAdapter for the local platform. @version 1.73.1 @namespace Default namespace for Unified Shell adapters for standalone demos. They can usually be placed directly into this namespace, e.g. <code>sap.ushell.adapters.local.ContainerAdapter</code>. @name sap.ushell.adapters.local @see sap.ushell.adapters.local.ContainerAdapter @since 1.15.0 @fileOverview The EndUserFeedback adapter for the local platform. @version 1.73.1 @fileOverview The Unified Shell's page builder adapter for the 'demo' platform. @version 1.73.1 @fileOverview MenuAdapter for the local platform. @fileOverview The NavTargetResolution adapter for the demo platform. @version 1.73.1 @fileOverview PagePersistenceAdapter for the local platform. The PagePersistenceAdapter must perform the following two tasks: <ul> <li>foo</li> <li>bar</li> </ul> @version 1.73.1 @fileOverview The Personalization adapter for the local platform. The local personalization adapter can be configured to store data either in the local storage (default) or in memory. @version 1.73.1 @fileOverview The Search adapter for the demo platform. @version 1.73.1 @fileOverview The SupportTicket adapter for the local platform. @version 1.73.1 @fileOverview The Unified Shell's UserDefaultParameterPersistence adapter for the local platform. TODO will be replaced by true persistence within this SP! This adapter delegates to the Personalization Adapter @version 1.73.1 @fileOverview The UserInfo adapter for the demo platform. @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved global jQuery, sap @fileOverview default event delegation setup for application @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Created by on 13/06/2019. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview Controller of the PageOverview fragment. @fileoverview Provides functionality for "sap/ushell/applications/PageComposer/view/TileSelector.fragment.xml" Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview PagePersistence utility to interact with the /UI2/FDM_PAGE_REPOSITORY_SRV service on ABAP @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The logger module logs the state, error and warning history of the "FLP Bootstrap Scheduling Agent" (FBSA). It can be used by all its FBSA sub modules (e.g. loader, scheduler and the scheduling agent itself). There's no need to explicitly log changes of the module, block and step states, as this is done automatically by the FBSA state module. The logger offers a dump function, which can be used interactively in the console of the development tools. Is prints the history on the console and allows filtering for step and block ids. <code> logger.dumpHistory(); logger.dumpHistory("Block A"); logger.dumpHistory("Step 1"); </code> Perspective: > Always log to the standard SAPUI5 log (sap/base/log) Remarks: > Use logger.verboseOff() to deactivate verbose logging. Usage: <code> sap.ui.define([ "sap/ushell/bootstrap/_SchedulingAgent/logger", "sap/base/util/now" ], function ( logger, fnNow ) { ... logger.clearHistory(); logger.logStatus({ time : fnNow(), // Date.now() is sometimes not that accurate type : "Step", id : "Step 1", status : "DONE", parameter : null, remark : "The one and only", byModule : "flpScheduler" }); ... }, false); </code> @version 1.73.1 @fileOverview The state module implements the internal state of the "FLP Bootstrap Scheduling Agent" (FBSA). It is used by all its sub modules (e.g. loader, scheduler) and the scheduling agent itself. State information is kept for loading blocks, loading steps and all FBSA modules. Generic and protected functions offer read and write access to the state object. These are provided as part of this module. For example: - state.setforLoadingBlock - state.getforLoadingBlock - state.setforLoadingStep - state.getforLoadingStep - state.setforModule - state.getforModule - state.isBlockWaitingForDependencies - state hasBlockLoadingTimedOut - and other convenience functions The methods offer some parameters, which are feed with fixed values (e.g. for state IDs and module IDs). These can be defined and registered by the owning FBSA modules, which write state information. The fixed state values, the "IDs", are then available for the other FBSA modules. It is also okay, if other FBSA modules register and use further convenience methods. In general any state change is written to the log. Remarks: > Perspective: . Contants defined in owner modules . Dedicated functions to register or access further IDs and convenience methods How to use: <code> sap.ui.define([ "sap/ushell/bootstrap/_SchedulingAgent/state" ], function ( state ) { // Set a state for a module state.setForModule(state.id.module.state.id, state.id.module.state.Initializing, "Hello Bootstrap Scheduling Agent" ); // Set the state of a loading step state.setForLoadingStep("STEP_A", "DONE", // or use state.id.loadingStep.Done 42, "Hurra", "flpScheduler" // state.id.module.flpScheduler.id ); // Get the state of a loading block and access its parts var oState = state.getForLoadingBlock("BLOCK_1"); // -> oState.time, oState.status, oState.remark, oState.parameter, oState.byModule // Use convenience functions var bStepLoaded = state.isStepLoaded("STEP_1"); }, false); </code> @version 1.73.1 @namespace This module is the root of the CDM bootstrap, to be used ONLY in DEVELOPMENT ENVIRONMENT. In summary, it configures the ushell and UI5. This starts the homepage component standalone and allows to run it without the renderer around it This module is the root of the CDM bootstrap, to be used ONLY in DEVELOPMENT ENVIRONMENT. In summary, it configures the ushell and UI5. In contrast to the production bootstrap root, it does NOT loads the core-min-x libs. This module is the root of the CDM bootstrap. In summary, it configures the ushell, UI5 and loads the core-min-x libs. Copyright (c) 2009-2017 SAP SE, All Rights Reserved This module provides the boot path. This module provides the bootstrap scripts DOM element. This module provides the task to be executed after the UI5 library has loaded. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview Configure the UI5Settings for Date and Time Format for the 'CDM' platform. @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved This module provides a collection of constant values. This module provides with a factory to define the configuration for the FLP core component. This module provides a flag to indicate whether debug sources are loaded or not. This module provides a function for loading the appruntime-min-x resources. This module provides a function for loading the core-min-x resources. This module provides a function that actually initiates loading of the launchpad content. Copyright (c) 2009-2017 SAP SE, All Rights Reserved This module provides a function that enables loading the correct splashscreen relevant for the media-type on which the launch pad is running. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved global sap Reads meta tags based on the provided Prefix. and parse each value of a meta tag to an array of object by a given a parse, default is JSON parser Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview This module reads the sap-ushell-xx-overwrite-config query parameter from the URL and generates an object out of it which can be merged with the ushell config. @private @version This module provides a function that sets favorite icons This module provides a collection of utility functions. This module is the root of the CDM bootstrap, to be used ONLY in DEVELOPMENT ENVIRONMENT. In summary, it configures the ushell and UI5. This starts the homepage component standalone and allows to run it without the renderer around it Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview Helper functions to handle app states Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview handle all the resources for the different applications. @version 1.73.1 @fileOverview handle all the resources for the different applications. @version 1.73.1 @fileOverview handle all the resources for the different applications. @version 1.73.1 @fileOverview handle all the resources for the different applications. @version 1.73.1 @fileOverview handle all the resources for the different applications. @version 1.73.1 @fileOverview defines the post message API for all applications running in iframe within the shell @version 1.73.1 @fileOverview handle all the resources for the different applications. @version 1.73.1 @fileOverview The models assosicated with the applciation. @version 1.73.1 Created on 12/06/2019. @fileOverview handle all the services for the different applications. @version 1.73.1 @fileOverview handle all the related shell elements of the different applications. @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved global jQuery, sap @fileOverview The UI integration's SAPUI5 control which supports application embedding. @version 1.73.1 define a root UIComponent which exposes the main view @fileOverview This file contains an annotation parser for factsheets. Provides control sap.ushell.components.factsheet.controls.PictureTile ! Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.components.factsheet.controls.PictureViewer. Provides control sap.ushell.components.factsheet.controls.PictureViewerItem. ! Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview This file contains an annotation parser for fact sheets. @fileOverview This file contains an annotation parser for factsheets. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @namespace @name sap.ushell.components.homepage.ActionMode @since 1.26.0 @private Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The Fiori launchpad main view. The view is of type <code>sap.ui.jsview</code> that includes a <code>sap.m.page</code> with a header of type <code>sap.ushell.ui.launchpad.AnchorNavigationBar</code> and content of type <code>sap.ushell.ui.launchpad.DashboardGroupsContainer</code>. @version 1.73.1 @name sap.ushell.components.homepage.DashboardContent.view @private @fileOverview A module that is responsible for creating the groups part (i.e. box) of the dashboard. Extends <code>sap.ui.base.Object</code> Exposes the public function <code>createGroupsBox</code> @see sap.ushell.components.homepage.DashboardContent.view @version 1.73.1 @name sap.ushell.components.homepage.DashboardGroupsBox @since 1.35.0 @private @fileOverview A module that is responsible for initializing the dashboard UIActions (i.e. drag and drop) of groups and tiles. Extends <code>sap.ui.base.Object</code> Exposes the public function <code>initializeUIActions</code> @version 1.73.1 @name sap.ushell.components.homepage.DashboardUIActions @since 1.35.0 @private Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview Pages Runtime Component This UIComponent gets initialized by the FLP renderer upon visiting #Shell-home or #Launchpad-openFLPPage if spaces are enabled (/core/spaces/enabled). In the future it should completely replace the classical homepage. @version 1.73.1 @fileOverview PageRuntime controller for PageRuntime view @version 1.73.1 @fileOverview PageRuntimeFormatter consists of formatter functions which are use throughout the PagesRuntime. @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Notification settings View Controller Notification settings View. The View contains a sap.m.VBox, including: - A header that includes a switch control for the "DoNotDisturb" feature - A table of notification types, allowing the user to set presentation-related properties Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved ! Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview Controller of the FLP spaces setting view The FLP spaces setting allows the user to activate either FLP spaces or the classic FLP home page. Further details @see sap.ushell.components.shell.UserSettings.Spaces . @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved View for displaying the User Profiling entires such as Usageamalytice ans Personalized Search. The View is launched when the UserProfiling option is chosen in the USerSettings UI. Content is added to this View by adding an entry to the profilingEntries in shell.controller. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Comparison Tile Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Comparison Tile Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview API for analytical extensions in OData service metadata. <a href="../sap-odata-analytics.jpg">Overview class diagram.</a> At the current stage, the API is purely experimental, not yet functionally complete and not meant for productive usage. At present, its only purpose is to demonstrate how easy analytical extensions of OData4SAP can be consumed. USE OBJECTS VIA METHODS ONLY - DO NOT ACCESS JAVASCRIPT OBJECT PROPERTIES DIRECTLY ! Lazy initialization of attributes will cause unexpected values when you access object attributes directly. PI BIT Consumption and Collaboration Main contact: Gerald Krause Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Comparison Tile Copyright (c) 2009-2017 SAP SE, All Rights Reserved Comparison Tile Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved TODO: migration not possible. jQuery.sap.declare is deprecated. Use <code>sap.ui.define</code> instead. @fileOverview This file contains miscellaneous utility functions. @fileOverview This file contains miscellaneous utility functions. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview Provides the Design Time Metadata for the sap.ushell.components.container.ApplicationContainer control @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview This file contains the functionality needed to register the Fiori Wave 2 font icons Initialization Code and shared classes of library sap.ushell. @fileOverview The NavigationMode module This module provides methods to get the navigation mode. The main method is #getNavigationMode that is used by NavTargetResolution#resolveHashFragment and indirectly by ClientSideTargetResolution#resolveTileIntent It provides the navigationMode in LPA for CDM in method getTileView Method Compute is used by ClientSide TargetResolution and takes not only the next application but also the current application into account. @version 1.73.1 @fileOverview This file contains miscellaneous functions which may be used to override/replace existing SAPUI5 methods. @fileOverview The FESR Enhancer attaches to the Front End Sub-Records tracker by UI5. UI5 tracks rendering and request activities and tries to detect what happens. The ushell FESR Enhancer has then the possibility to overwrite and enhance the result with FLP specific information. @private @fileOverview Provides analytical data like duration for navigation steps in the shell, in FLP, in particular an array of all statistical records @version 1.73.1 @fileOverview Class for statistical record It should contain data like step, duration after a navigation in the shell, can have status open. @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Dummy Implementation for the ShellUIService. This service implementation is used to suppress the interaction with the shell when using the application warmup plugin. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved FLP Performance Measurements @private Copyright (c) 2009-2017 SAP SE, All Rights Reserved Default renderer for SAP Fiori launchpad. Publishes all lifecycle events as described in the documentation of the "sap.ushell" namepsace. @name sap.ushell.renderers.fiori2.RendererExtensions @since 1.26 @private Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved The controller of AllMyApps MVC. The view of AllMyApps MVC. Creates a Master-Details UI (SplitApp) that presents the following: - Master area - List of data_sources/providers list or the data-sources 2nd level data (groups) - Details area - Grid that contains the items\apps of the group that is selected in the master area Copyright (c) 2009-2017 SAP SE, All Rights Reserved trach navivigation global jQuery, sap global jQuery, sap, window, document, $ global jQuery, sap, $ eslint no-useless-escape: 0 global sap, window global sap eslint no-fallthrough: 0 var SearchModelName = 'sap/ushell/renderers/fiori2/search/SearchModel'; ushell-lib/src/main/js/sap/ushell/renderers/fiori2/Shell.view.js global sap global $ Copyright (c) 2009-2017 SAP SE, All Rights Reserved global jQuery, sap TODO error handle search sub providers Copyright (c) 2009-2017 SAP SE, All Rights Reserved eslint no-useless-escape:0 Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved iteration 0 ok @fileOverview @version iteration 0 ok global jQuery, sap global $, jQuery, sap, window, document global $, jQuery, sap, window global jQuery, sap global sap global $ global sap global sap global sap global jQuery, $, sap global jQuery, sap global jQuery, sap global $ global $ global sap, jQuery, $, my global jQuery, sap global $, d3, navigator global document global sap global jQuery, sap global $, jQuery, sap, window global sap Copyright (c) 2009-2017 SAP SE, All Rights Reserved global sap, $ global sap global $ global jQuery, sap global $ global $, jQuery, sap, window Copyright (c) 2009-2017 SAP SE, All Rights Reserved eslint space-in-parens: 0 global sap,window,$, jQuery global sap, $, jQuery global sap global sap global $, sap, window global sap global jQuery, sap Copyright (c) 2009-2017 SAP SE, All Rights Reserved global sap global jQuery, sap, window, document global jQuery, sap global sap global sap Copyright (c) 2009-2017 SAP SE, All Rights Reserved global jQuery, sap global jQuery, sap global jQuery, sap global jQuery, sap global sap, jQuery global sap, jQuery global sap, jQuery global sap, jQuery global sap, jQuery global jQuery, sap Copyright (c) 2009-2017 SAP SE, All Rights Reserved global sap global jQuery, sap global jQuery, sap, clearTimeout, setTimeout Copyright (c) 2009-2017 SAP SE, All Rights Reserved global jQuery, sap global jQuery, sap, window global jQuery, sap global sap mathias: dataType:'text' @fileOverview This file handles the resource bundles. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The Unified Shell's AppLifeCycle service enables plug-ins to enquire the which application is currently displayed and listen to life cycle events. @version 1.73.1 @fileOverview The Unified Shell's AppState service provides read and write access to a cross user storage driven by a generated key. This is *not* an application facing service, but for Shell Internal usage. This service should be accessed by the application via the CrossApplicationNavigation service. @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The Unified Shell's bookmark service, which allows you to create shortcuts on the user's home page. @version 1.73.1 @fileOverview This module performs client side navigation target resolution. This Module focuses on the core algorithm of matching an intent against a list of Inbounds, (aka AppDescriptor signature objects), which in addition have a property resolutionResult representing an "opaque" resolutionResult. getLinks should be called with already expanded hash fragment. The output of getLinks should then be postprocessed for compaction, outside this service. Missing: <ul> <li>Scope mechanism</li> <li>Parameter expansion with dynamic parameters</li> </ul> NOTE: Currently the ABAP adapter also delegates isIntentSupported only (=erroneously) to the resolveHashFragment adapter implementation, missing intents injected via custom resolver plug-ins. The custom resolver hook functionality is currently outside of this method (only affecting resolveHashFragment), as before. The future architecture should handle this consistently. NOTE: Old implementations also gave inconsistent results. For example the ABAP adapter on isIntentSupported did call directly the adapter, not the service, thus missing additional targets added only via a custom resolver. In the future, the custom resolver mechanism should be probably moved towards modifying (or only adding to the list of Inbounds), this way a single data source has to be altered to support consistently getLinks, isIntentSupported. @version 1.73.1 @fileOverview This module exposes a CommonDataModel based site document in a platform neutral format to it's clients @version 1.73.1 @fileOverview The Unified Shell's Configuration service enables Components of any kind to consume parts of Configuration provided by the shell. It allows to attach on updates and receive the current values @version 1.73.1 @fileOverview The Unified Shell's Configuration Defaults service exposes default configurations set in the code base. @version 1.73.1 @namespace Default namespace for Unified Shell services. They can usually be placed directly into this namespace, for example <code>sap.ushell.services.Container</code>. @name sap.ushell.services @see sap.ushell.services.Container @since 1.15.0 @public @fileOverview Offers an extension point for FLP content providers. @version 1.73.1 @fileOverview Creates an adapter factory for data not handled by the default adapter. Once instantiated, returns a map of adapters to be used by the LaunchPage Service @version 1.73.1 @fileOverview Cross Application Navigation. This file exposes an API to perform (invoke) Cross Application Navigation for applications. It exposes interfaces to perform a hash change and/or trigger an external navigation. @version 1.73.1 @fileOverview Dark Mode Support The service provide dark mode support functionality @version 1.73.1 @fileOverview The EndUserFeedback service. @fileOverview The Unified Shell's page builder service. @version 1.73.1 @fileOverview The menu service provides the entries for the menu bar @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The NavTargetResolution service. @fileOverview This module prepares the navigation data needed by the page dereferencer. @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The Unified Shell's page building service. @version 1.73.1 @fileOverview This module deals with the page persistence. @version 1.73.1 @fileOverview This module deals with page related referencing and dereferencing. @version 1.73.1 @fileOverview This module exposes a model containing the pages hierarchy to its clients. @version 1.73.1 @fileOverview The Unified Shell's personalization service, which provides generic read and write access to the currently logged on user's personalization settings for the app currently executed in the shell. @version 1.73.1 @fileOverview The Unified Shell's PluginManager service, which allows you to handle the loading of Fiori Launchpad plugins. @version 1.73.1 @fileOverview TODO @version 1.73.1 global jQuery,sap @fileOverview Shell Navigation Service. @fileOverview Shell Navigation Hash Changer Service. @fileOverview The SupportTicket service. @fileOverview URL Parsing shell services URL Parsing serivces for shell compliant hashes [ SO-Action~[Context]] [ ? [A=B(&C=D)+] &/ The parsing functions are deliberately restrictive and fragile, only shell compliant hashes are parsed correctly, invalid or completely empty results ( not silently ignored parts) are returned if the hash is not deemed parseable @fileOverview URLShortening This service if for internal Shell usage only It has services to compact and expand Long shell hashes @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The Unified Shell's UI5 component loader service. This is a shell-internal service and no public or application facing API! @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The Unified Shell's UserDefaultParameterPersistence service provides read and write access to a per user storage of per user persisted values. Note: Values may be read only once per launchpad and storage may be more coarse grained than on parameter level. Thus inconsistencies with concurrent editing in separate clients may arise Note: [security, performance] Values are be client side cached (Browser HTTP Cache), if a appropriate cache-busting is used. This is *not* an application facing service, but for Shell Internal usage. @version 1.73.1 @fileOverview The Unified Shell's UserDefaultParameters service provides read and write access to the User Default Parameter values. This is *not* an application facing service, but for Shell Internal usage. This service should be accessed by the application via the CrossApplicationNavigation service. @version 1.73.1 @fileOverview The Unified Shell's user information service, which allows you to retrieve information about the user. @version 1.73.1 @fileOverview The Unified Shell's user activity service. @version 1.73.1 @fileOverview This module deals with the retrieval of visualization data in a platform independent way. @version 1.73.1 @fileOverview This module deals with the instantiation of visualizations in a platform independent way. @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview Exposes methods to format complex objects used by ClientSideTargetResolution. This module can be also used to serialize/deserialize these objects (e.g., inbounds), but only for debugging/testing purposes. Please DO NOT USE this code to build any robust, bullet proof productive feature. It's at the moment ok for debugging purposes only. This is a dependency of ClientSideTargetResolution. Interfaces exposed by this module may change at any time without notice. @version 1.73.1 @fileOverview Exposes a method to create an index over an array of inbounds. The index can be used to efficiently retrieve "chunks" (i.e., segments) of the whole response. Usage: <pre> sap.ui.require([InboundIndex], function (InboundIndex) { var oIndex = InboundIndex.createIndex([ ...aInbounds ], { "someTag": function (oInbound) { return oInbound.semanticObject.length > 0 ; }, "otherTag": function (oInbound) { return oInbound.action.indexOf("A") > 0; } }); var aInbounds = oIndex.getSegment("SomeSemanticObject"); var aInbounds = oIndex.getSegmentByTag("someTag"); }); </pre> This is a dependency of ClientSideTargetResolution. Interfaces exposed by this module may change at any time without notice. @private @version 1.73.1 @fileOverview Provides inbounds describing all the possible navigation targets. Each inbound is represented as an object with a structure that looks like: <pre> { semanticObject: {string}, action: {string}, signature: { parameters: { "parameter1" { "defaultValue": { value: "abc" }, "filter": { value: "(abc)|(def)", format: "regexp" }, "required": true }, ... more parameters } additionalParameters: "notallowed", // "allowed", "ignored" } } </pre> This is a dependency of ClientSideTargetResolution. Interfaces exposed by this module may change at any time without notice. @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview PrelaunchOperations are executed just before launching the application (post parameter mapping and app state merging) if the <code>sap-prelaunch-operations</code> parameter is specified as a technical parameter. @private @version 1.73.1 @fileOverview Exposes methods to perform ClientSideTargetResolution search algorithm. This is a dependency of ClientSideTargetResolution. Interfaces exposed by this module may change at any time without notice. @version 1.73.1 @fileOverview Exposes a singleton that provides logging functionality for complex operations, carried out in a multi-staged fashion. As a general design principle, the amount of code used to set-up and perform logging is regarded as potentially expensive, and it's a bad idea to run this coded when not needed (e.g., when debugging is not enabled). Because of this, functions that are only called when debugging is enabled are used to obtain input parameters for any public method exported by the module. Usage: oLogger.begin(function () { return { logId: "some unique id", title: "Grow a tree", moduleName: "sap.ushell.services.ClientSideTargetResolution", stages: [ "STAGE1: Buy seeds", "STAGE2: Plant seeds", "STAGE3: Water", "STAGE4: Wait" ] }; }); oLogger.log(function () { return { logId: "some unique id", stage: 1, prefix: "-", lines: [ "going to the shop", "buying seeds" ] }; }); oLogger.end(); // logs on the console This is a dependency of ClientSideTargetResolution. Interfaces exposed by this module may change at any time without notice. @version 1.73.1 @fileOverview Exposes utility methods for ClientSideTargetResolution This is a dependency of ClientSideTargetResolution. Interfaces exposed by this module may change at any time without notice. @version 1.73.1 @fileOverview Holds the inbounds that should be always consider during the target resolution process. These inbounds are called "virtual" because they figure exactly as if they were regular inbounds configured by the FLP user/admin. This is a dependency of ClientSideTargetResolution. Interfaces exposed by this module may change at any time without notice. @version 1.73.1 @fileOverview This module performs operations on the sap-xapp-state data passed to an intent before the target application is launched. Operations in this module are assumed to be executed after the target mapping has been identified (post search). @private @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview Provides the configuration array for the ContentExtensionFactory. Any adapter needed by the factory should be defined here. Any special handling of the configuration should be done by the config handler which is called by the factory to generate an explicit Adapter configuration @version 1.73.1 @private @fileOverview Provide mock feature group data @version 1.73.1 @private @fileOverview Cross Application Navigation utility functions @version 1.73.1 @fileOverview AppForInbound uses a navigation data inbound to resolve an CDM app reference of a CDM page. @version 1.73.1 @private @fileOverview The CDM page dereferencer uses visualization- and navigation data to resolve a reference page into a complete CDM site (without references). @version 1.73.1 @private @fileOverview This module is responsible to create reference pages, that is a shareable JSON representation of layout and navigation targets in the specific format @version 1.73.1 @private Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview The extensions which plugins can use to customise the launchpad @version 1.73.1 @private @fileOverview The extensions for the ShellHeader @version 1.73.1 @fileOverview Helper functions for <code>sap.ushell.services.Ui5ComponentLoader This is a shell-internal service and no public or application facing API! @version 1.73.1 Provides control Provides control Provides control Provides control @fileOverview This module is about the ushell support plugin Adds a plugin to the SAPUI5 Diagnsotics tool to show the startup configuration (window["sap-ushell-config"]) of the Fiori launchpad in a tree table seperated by IconTabFilters for the first level properties of the configuration object. Also it provides a search for last level properties. @version 1.73.1 This control replaces the Fiori2 ViewPortContainer for the no-viewports scenario. ! Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.appfinder.AppBox. ! Copyright (c) 2009-2017 SAP SE, All Rights Reserved @name sap.ushell.ui.appfinder.PinButton @private This file provides compatibility with a previous implementation. Provides control sap.ushell.ui.footerbar.AboutButton. ! Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.footerbar.AddBookmarkButton. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.footerbar.ContactSupportButton. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.footerbar.EndUserFeedback. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.footerbar.HideGroupsButton. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.footerbar.JamDiscussButton. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.footerbar.JamShareButton. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.footerbar.LogoutButton. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.footerbar.SendAsEmailButton. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.footerbar.SettingsButton. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.footerbar.UserPreferencesButton. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.shell.ShellHeadItem. Provides control sap.ushell.ui.launchpad.ActionItem. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.AnchorItem. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.AnchorNavigationBar. Copyright (c) 2009-2017 SAP SE, All Rights Reserved @name sap.ushell.ui.launchpad.CatalogContainer @private @name sap.ushell.ui.launchpad.CatalogsContainer @private Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.EmbeddedSupportErrorMessage. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.GridContainer. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.GroupHeaderActions. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.GroupListItem. @class GroupListItem renderer. @static @private Provides control sap.ushell.ui.launchpad.LinkTileWrapper. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.LoadingDialog. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.Page. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.Panel. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.PlusTile. @class PlusTile renderer. @static @private @fileOverview Provides control sap.ushell.ui.launchpad.Section @version 1.73.1 Provides control sap.ushell.ui.launchpad.ShortcutsHelpContainer ! Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.TileContainer. Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview This file contains miscellaneous utility functions. they are for exclusive use within the unified shell unless otherwise noted Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.launchpad.TileState. ! Copyright (c) 2009-2017 SAP SE, All Rights Reserved @name sap.ushell.ui.launchpad.ViewPortState @private Initialization Code and shared classes of library sap.ushell.ui.shell.ContentRenderer An invisible container, located (i.e. floats) at the top right side of the shell and can host any <code>sap.ui.core.Control</code> object. Extends <code>sap.ui.core.Control</code> Provides control sap.ushell.ui.shell.ShellNavigationMenu Copyright (c) 2009-2017 SAP SE, All Rights Reserved Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.shell.ShellAppTitle This control is responsible to display the Shell Header Title. This control could be rendered in two different states: 1. Title only: only the title will be rendered inside the Shell Header 2. Title with popover button: A button will be placed in the Shell Header Title area. When the user clicks on the button, a popover will raise and render the innerControl as its content. innerControl: the content of the popover. Will be destroyed by the ShellAppTitle control. @name sap.ushell.ui.shell.ShellFloatingAction @private @class ShellFloatingAction renderer. @static @private Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.shell.ShellHeadItem. Provides control sap.ushell.ui.shell.ShellHeadUserItem. Provides control sap.ushell.ui.shell.ShellLayout. Provides default renderer for control sap.ushell.ui.shell.ShellLayout Provides control sap.ushell.ui.shell.ShellNavigationMenu Provides control sap.ushell.ui.shell.SplitContainer. Provides default renderer for control sap.ushell.ui.shell.SplitContainer The Tool Area control is used in the FLP extensibility. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.tile.DynamicTile. Copyright (c) 2009-2017 SAP SE, All Rights Reserved Provides control sap.ushell.ui.tile.ImageTile. global jQuery, sap Provides control sap.ushell.ui.tile.StaticTile. global jQuery, sap Provides control sap.ushell.ui.tile.TileBase. Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview This is a utility module that collects common activities implemented by controllers of different ui components. @version 1.73.1 @private @namespace sap.ushell.ui5service.AppIsolationService @private @fileOverview Card Navigation @version 1.73.1 global sap global sap @namespace sap.ushell.ui5service.ShellUIService @public @namespace sap.ushell.ui5service.UserStatus @public @deprecated Since 1.70 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview Card UserRecents Base @version 1.73.1 Copyright (c) 2009-2017 SAP SE, All Rights Reserved @fileOverview This file contains miscellaneous utility functions. They are for exclusive use within the unified shell unless otherwise noted. @fileOverview Constructor of a small HTTP client based on `XmlHttpRequest`. @version 1.73.1 @private @fileOverview A read-only JSON Model. The set and load methods are overwritten by empty methods. Additionally private set and load methods according to the sap.ui.model.json.JSONModel are added. @fileOverview Constructor of a small HTTP client based on `XmlHttpRequest`. It supports CSRF protection handling. @version 1.73.1 @private global sap global Promise @fileOverview This file contains functionality to deep clone javascript plain objects. This functionality is not public and is to be imported in the scope of the unified shell code only. @fileOverview This file contains miscellaneous utility functions for shortcut operations on plain objects. They are for exclusive use within the unified shell unless otherwise noted. @fileOverview This file contains functionality to check and operate on types. This functionality is not public and is to be imported in the scope of the unified shell code only. Copyright (c) 2009-2017 SAP SE, All Rights Reserved